Once the ceiling has dried, paint any crown molding , trim around windows and doors, and baseboards. Finally, paint the walls. Apply the paint in long sections. If you're using a brush, brush upward to unload the paint, downward to set the paint, then up again to remove the brush marks.
If you're using a roller, load it up on a paint tray by rolling it up the paint tray's ramp until it's saturated. Then, work in small sections about four square feet and roll paint onto the walls in an overlapping W motion. Punch a series of holes around the bottom of a paint can's rim with a nail.
The holes will let paint drain down into the can and keep it from pooling around the rim when you pour it into a roller tray or other container. It also will ensure that your lid goes on tightly. A good seal will help keep the paint fresh. Before you start, buy all the paint for a room at the same time, and have it shaken at the home center. If you use it within a week, just stir it lightly. If you have to wait more than a week, take it back for shaking or mix it with a paint-mixing propeller affixed to an electric drill run the drill at a slow speed.
To reduce spattering, stick the shaft through a foam plastic picnic plate before inserting it in the drill chuck. When using more than one gallon of the same paint, mix all gallons together in a 5-gallon bucket. Called boxing, this procedure will ensure that the color is uniform throughout the application. This is particularly worthwhile if you're using a custom-mixed color. When you take a break from your paint job, wrap brushes and rollers in plastic bags, squeeze the air out, and seal with twist ties or rubber bands.
To leave them overnight, place the sealed tools in the refrigerator. Trying to figure out how much time it will take to tackle one room and if you'll need to take a break in between? It depends on how big your space is, but it can take anywhere from two to three hours to put on the first coat. You'll need to wait another two hours for the paint to dry before applying a second coat. In total, that's anywhere from eight to twelve hours for a bedroom or medium-sized living room. Store paint successfully by keeping air out of the paint container.
To accomplish this, add a gasket between the cover and the can using a circle cut from a heavy-duty trash bag. Spray vegetable oil on one side of the bag and set it spray-side down on the can. Set the lid on top of the plastic. Tap the lid to seat it in the well. Store the can upside down in a room free from temperature extremes. To keep brushes in good shape after your paint job is done, make a DIY cover for the bristles.
Cut a rectangle of heavy kraft paper or grocery bag that's twice the length of the ferrule and bristles and four times the width of the brush. Crease the paper vertically down the center. Place the brush next to the crease on the opened paper at the edge, and fold the paper. Roll the brush into the paper and secure it with a rubber band. Hang the brush by the handle or store it flat. Paint that is more than a year old may have lumps in it that will interfere with application.
First stir the paint up from the bottom until it's as free of lumps as possible. Then box the paint, straining it through a nylon paint strainer or cheesecloth.
If the paint has developed a skin on top, cut around the skin with an old kitchen knife and remove it. If brush marks on your painted projects bother you, consider a paint additive that improves flow-out without affecting the durability of the finish. One such product for oil-base finishes is Penetrol. Its companion product, Floetrol, is for water-base paint. These products also work well when you're rolling paint onto walls or ceilings.
The improved paint consistency reduces spatters and the appearance of roller marks. The label provides general guidelines for the amount of additive needed, which varies with the type of paint and the application temperature.
It takes some experimenting to get the feel of these products. By Jessica Bennett Updated May 13, Each product we feature has been independently selected and reviewed by our editorial team. If you make a purchase using the links included, we may earn commission. Save Pin FB More. Before you open up that can of paint, brush up on these painting tips and tricks.
Learn how to pick the right paint color, what tools you need, and how to clean up once the job is done. Even if you're a beginner with a brush, you'll be painting like a pro in no time. Start Slideshow. Tweet Email Send Text Message. Credit: Adam Albright. Credit: Paul Dyer. Shake or stir, it's up to you.
If there is, take it out preferably in one piece before mixing. What happens if you don't shake paint? If the paint has not been mixed all the way , all of it's componants will not be blended and the true color and consistancy will not be applied.
In whatever mode of application is used, most likely the first part to go on will be the oil clearish looking fluid then streaked color parts and separate tints. How long can paint sit before it has to be shaken? If the can has a good seal and the paint has not frozen, I have used paint that was resealed over 12 months ago. Just make sure that you stir it until all on the solids that you feel in bottom of the can are dissolved.
If the can is full pour about a quarter of the can out before stirring. How do you mix paint that has been sitting? Mix the paint with a paint stirrer for five minutes or longer. Try brushing the paint onto cardboard to test it out. If the paint can be applied smoothly, then it is still usable. If the paint comes out grainy or lumpy and cannot be stirred out after several minutes, then the paint needs to be tossed. What happens if you use old paint? Solvent-based paints have a year shelf life.
Latex has a shelf life of 10 years. If there are lumps, the paint is no longer good. How long do I need to stir paint? We recommend at least 5 minutes of effective stirring. The problems with air bubbles include a lack of adhesion and a rough finish. Note: Shaking paint by yourself should not replace stirring your paint before use.
Hardware stores or other places that sell paint will usually have large paint mixing machines. Stirring your paint is one of the most important parts of using paint.
If you forget to stir — or stir your paint improperly — you can end up with unsatisfactory results. Well, as we already stated, you need to stir your paint to ensure that the additives, pigments, solvents, and binders in your paint are all working together properly.
Is there any dirt or grime that snuck into an old can of paint? If so, you may need to discard the paint or only use it for unimportant projects. Is there a film that has dried over the top of your paint? If your paint was frozen, it may be useless or may need extra stirring.
Stirring your paint allows you to inspect your paint and prepare it for use. Stirring your paint may seem simple; however, there is more to this technique than meets the eye. Follow the steps below to stir your paint. Being careful not to spill a full bucket of paint should not be overlooked.
Paint can be incredibly difficult to clean up after a spill — especially if it starts to dry. If you just stab the center of the paint and start stirring, you may neglect some areas of the paint. When you begin stirring with a stir stick, be sure the stick has a flat bottom. Use this flat end to scrape along the bottom of the can. Also, take some time to scrape the sides. Scraping the sides will ensure you work all the parts of the paint together. Use a steady motion while stirring.
When it comes to painting, air bubbles are a problem. If you are using a drill to spin a paint mixer, you need to be especially concerned with air bubbles. To avoid the pesky little bubbles, fully submerge the stir stick before you start to stir. Well, if you begin using an electric spinner before it is fully submerged, the fast spinning action will create an air pocket.
This air pocket will force air bubbles into the paint. Not good.
0コメント