This is because they release ions that are positively charged. This attacks the negatively charged algae particles. Since algaecides do not break down in sunlight they remain available in the water much longer. We also should understand that chlorine attacks the various polymer chains in algaecides and it also combined with the ions as far as the metal based ones are concerned. Hence, when you use chlorine and algaecide together, you waste the latter because the pool has just been shocked with chlorine.
If you want to increase the potency of chlorine, you could think of adding chlorine enhancer which is also referred super shock treatment. You could add sodium bromide and other ammonia compounds. These combine well with chlorine and they produce amines. These kill algae and they are designed for use when there is serious algae problem. Many people add it believing that if you use it regularly then it will prevent algae from growing.
This may be true but if the algaecide has nothing to work on it will just build up in the pool and foam is likely to occur. Another way to prevent it is to use a non-copper algaecide such as In The Swimming Pool Algaecide Plus which is non-foaming. One cause of algae infestation is that the pool has been closed up over the winter.
The algae have been quietly moving in during the off-season. The weather warms up, and the cover is removed letting in sunlight. That sunlight encourages an algae bloom. It is always recommended to treat the pool with the recommended amount of algaecide before closing it up for the season.
This helps keep algae colonies in check during the winter months. The pool is shocked with chlorine and treated with an algaecide as part of the preparation for summertime pool fun. The proper dosing of chlorine effectively checks the growth of the most common types of algae. However, when the chlorine levels are allowed to dip, whether through neglect or during a vacation, it creates a prime environment for algae growth.
As the algae bloom begins to take over the pool, it further disrupts the pH and sanitation chemical balance, making the environment perfect for its own growth and replication. Another cause of algae infestation is introduction of algae from elsewhere. If the pool owner has visitors over to swim in the pool, their swim clothing may carry algae from other pools or natural bodies of water, which start an infestation.
When the swimwear and pool toys are used in natural bodies of water, it must be assumed that they are now carrying algae that will try to infest the pool water. The key to algae bloom prevention is cleaning. The cleaner the pool and the stuff that goes into it is kept, the less likely algae will be present.
All garments and towels that have been used in a different pool, or in a natural body of water must be thoroughly laundered and double rinsed in the warmest water that can be tolerated by the fabric.
This is not necessarily the case. As the swimwear is drying, it is being exposed to various spores and bacteria in the air. These find warm, wet swimwear to be a perfect breeding ground. Even when the swimwear is dry, those bacteria and spores are sitting and waiting for rehydration. So, the best thing every pool owner can do is to launder all swimwear and towels often. If this is laborious, consider having a collection of swimwear for each pool user.
Require that they use a fresh swimsuit and towel for each day, and then launder all of the swimwear and towels at once. Your pool will be much more clear for longer. It is more expensive. As for your foaming, it will dissipate over time as the algaecide will slowly break down from chlorine. You can shock the pool with higher chlorine levels if you want to get rid of it faster, but this is not necessary as it will go away probably in about a week two at the most.
Is it bad to run your pool pump 24 hours a day? Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. Does shock kill algae? Large amounts of algae may require you to add up to three doses of shock over a hour period.
When using large amounts of shock to kill algae, water may become cloudy. After this, add a pool algaecide like Leslie's Algae Control and brush the pool again. After brushing, vacuum the pool. What happens if you swim in a shocked pool?
For example, it can turn black clothes pink and white clothes yellow if the concentration is too high. Don't worry—you can't overshock your pool. How much algaecide do I add to my pool? Use the guidelines below to determine when you and your family can safely swim. Give us a call today at for more information or request your free quote. Your beautiful oasis awaits. Pools are wonderful gathering places for families. What you may not be clear on, however, is exactly why fiberglass pools are so low maintenance.
A lot of it comes down to chemistry. Jun 23,
0コメント