Another cause may be from a malfunctioning toilet. For example, if the float has malfunctioned, it may cause the water to keep refilling the tank to the point of overflow. General Plumbing. Schedule Service. Financing Options. Reading Time: 3 minutes What to Do When Your Toilet is Overflowing Step 1 Remove the lid from the toilet tank, reach inside the tank and lift up the bottom of the fill valve or float to stop the water from refilling.
Step 2 Turn off the water supply near the toilet. Do not put any chemicals or objects into the toilet — leave it to our plumbers to take care of it for you. Our plumbers are highly experienced and will know exactly what to do in this situation. If you are inexperienced, do not try to unclog the toilet on your own or by using foreign objects, as you might only cause further damage.
Do not try remove and inspect any pipes that are connected to the toilet, as you may cause more flooding problems by opening the wrong pipe! Make sure that you stick to steps only. Do not flush any garbage waste or chunks of solid or bulky material wood, metal, glass, paper, straw, plastics.
They will inevitably clog the toilet. See our list of the best drain snakes here. Don your rubber gloves and remove excess water from the toilet into a bucket with a small container. Then place the hook end of the toilet snake into the bowl and begin turning the crank clockwise so the cable extends into the drain. Begin cranking counter-clockwise to pull the clog out of the drain back up into the toilet bowl.
Dump the clogged material into the bucket and repeat the process several times to ensure that the clog is completely removed. Disclosure: BobVila. You agree that BobVila. All rights reserved. Expert advice from Bob Vila, the most trusted name in home improvement, home remodeling, home repair, and DIY.
Bathroom Solved! Use a toilet auger to fish out foreign objects causing a clog that cannot be retrieved using a plunger. Insert the tube end of the auger as deeply into the toilet hole as possible. Apply gentle pressure on the other end of the auger to release the snaking portion of the auger and turn the auger at the same time. Pull the auger out of the hole if you feel pressure or resistance indicating you've removed the clog.
Reset the float mechanism so that it sits lower in the tank to prevent the tank portion of the toilet from overflowing. Ensure that the chain attached to the float is not kinked or tangled, or that the float is not caught on a piece of debris or other portion of the toilet. Contact a plumber to examine your external plumbing vents if your overflowing is chronic.
A blockage in your external vents will cause toilets to overflow from the bowl or the tank. Recurring overflowing of soiled water indicates a sewer backup. If you have a private septic tank, contact a plumbing company to flush your system. Do not handle or live in an area contaminated with sewage.
Hannah Wahlig began writing and editing professionally in
0コメント